EasyCut TC 400/500

Krone’s all new ECTC 400 and 500 mowers are packed with industry leading technology, available in steel roller conditioner, rubber roller conditioner, flail conditioner and non conditioner models. The optional 3m transport kit allows operators to now change from transport mode to working mode in less than 30 seconds all without leaving the tractor cab. The new ECTC 400 and 500 mowers are designed to handle the toughest of Australian conditions.

Where to buy Download brochure (5.4 MB)

Cutterbar

EasyCut TC 400/500 feature image 1

Built tough to handle any conditions in the field, Krone fully welded one piece construction cutterbar provides the resilliance that contractors and farmers alike look for.

The satellite gear system comprises of large idler gears that turn slowly to reduce noise and heat. The larger idler gears provide increased tooth contact surface area with adjoining gears , reducing the stress on each gears.

Krone’s cutterbars feature Lifetime Oil filling! No Grease nipples! No oil changes! Maximise your time in the field with the ingenious design which ensures the minimal oil contamination giving your mower a longer life.

Perfect Cut

EasyCut TC 400/500 feature image 2

Krone mowers feature large over lap between discs, this results in the perfect stripeless cuts.

The wedge shaped cutterbar is adjustable through a large setting range which enables short stubble cuts in meadows and pastures and longer stubble in long stemmed field crops.

Modify crop stream by swapping cutting disc rotation direction to optimise crop flow and windrow formation.

Durability

EasyCut TC 400/500 feature image 3

All Krone mowers are built to stand the test of time, with only the highest quality components used you can be sure that your Krone mower is built to last.

When the disc hits an obstacle, the shear pin breaks and the disc threads up on the threaded drive shaft and moves out of the way of it’s neighbouring discs, which continue to spin without damage.

Heavy-Duty tapered roller bearings allow for higher load carrying capability and can withstand higher shock loads.

Conditioning

EasyCut TC 400/500 feature image 4

Steel roller conditioners: The crimp style is especially effective for stiff or heavy stem material and produces well-formed windrows over a wide range of widths. Steel rollers are extremely durable and require minimal maintenance.

Polyurethane roller conditioners: The rollers deliver a combination crimp-and-crush action while being gentler to leaves.

Flail conditioner: The v-tine conditioner removes the stem wax with a crimping action to promote dry-down time.

Non conditioner machines are also available when conditioning is not needed.

Options

EasyCut TC 400/500 feature image 5

Optional 3m transport Kit, save time and money when transporting your mover down the road, no longer need permits or vehicle escorts when moving the mower from paddock to paddock.

Go from working position to transport position in just 30 seconds all while staying seated in the cab.

Optional 2 point drawbar hitch

Optional quick change blades makes changing blades in the field a breeze.